Power Jumper IC™ HDTV & Sound Bar Power Relocation Kit
By MIDLITE Corporation

MSRP
$199.45

The Power Jumper IC™ HDTV & Sound Bar Power Relocation Kit easily conceals power & A/V cables within the wall for a clean and professional appearance. The prewired kit is recessed and features an in-wall interconnect that can be fed through 1" diameter holes for ease of installation.

The Power Jumper IC™ HDTV and Sound Bar Power Relocation Kit provides custom low voltage installers and homeowners an easy to install cable management solution that hides the ugly wires for a wall mounted HDTV and sound bar. The kit is prewired and features overmolded in-wall jumpers that simply plug together. The custom low profile in-wall jumper can easily fit through 1" diameter holes, making it perfect to be fed through stud bays, fireblocking and past other obstructions in within the wall. Once the connections are made, simply apply the metal strain relief bracket to the interconnects for a solid connection. Since the the user won't need to perform any wiring, the Power Jumper IC™ doesn't require the installer to be a licensed electrician to follow codes and guidelines. With only a few basic tools, the user can have an elegant and professional looking home theater in a very short time. Previous models of the prewired Power Jumper line required the user to fish the IEC inlet through the stud bay. In some instances this wouldn't be a problem, but when dealing with narrow stud bays or fire blocking, the new custom interconnected provides a simple solution for challenging installs.

Benefits to the Homeowner

The Power Jumper IC™ provides homeowners a clean, professional and custom looking base for their home theater or any room with a wall mounted HDTV. For the more hands on homeowner, the Power Jumper IC™ allows them the freedom and flexibility to install their HDTV how and where they like without the appearance of wires. The prewired in-wall jumpers come in varying lengths from 5' to 40', allowing A/V equipment such as cable boxes and gaming consoles to be next to the TV or out of sight away from the television. The receptacles are mounted in recessed Pocket Plates™ that allow furniture and electronics to be placed nearly against the wall without causing damage to the cables and plugs. It also offers the peace of mind that every kit is electrically tested before leaving our warehouse. 

Benefits to the Integrator

The Power Jumper IC™ HDTV and Sound Bar Power Relocation Kit is a perfect solution for low voltage and home theater installations. The kit is prewired to offer a quick installation and to alleviate potential dangers of wiring new receptacles in the field. Low voltage installers who are not licensed electricians do not need to coordinate with an outside electrical contractor or seek training to confidently relocate power for a flat panel display and sound bar. To install the Power Jumper IC™, simply use the provided paper templates to cut holes in the drywall for the Pocket Plates™, feed the low-profile Jumper through the stud bay and insert each female end into its corresponding male counterpart. The female Jumper can pass through 1" diameter holes, allowing the installer to pass through studs bays and fireblocking. Securely fasten each interconnect connection with the provided screws and strain relief bracket. Extend power from a nearby wall outlet using the provided power cord and connect it to the IEC inlet in the bottom recessed box. The installer can then feed the remaining low voltage cables through the brush plates and circular Speedport™. The kit is ETL and UL listed and the custom in-wall interconnect meets necessary electrical codes for in-wall power once fastened securely.

More information here -
https://youtu.be/8T-HP3X8xIs